虹吸式雾化喷嘴:
· 能够调节和控制虹吸比例, 满足多种应用
· 有带刻度的调节螺钮保证可重复虹吸
· 混合剂比例可调整,浓度大小随时改变;
· 混合剂的喷雾操作是可控的;
· 止回阀设计新颖,虹吸器反应快,操作可靠。
· 能够节约化学剂的使用
· 流量范围0.5‐6gpm(1.9 – 22.7 l/min)
· 压力:4000 psi(276 bar)
· 螺纹入口连接:3/8''或1/2''MPT/BSPT
· 材质以黄铜材质为主、含有一个氟橡胶止回阀座和O形环(标准配置)
· 提供特殊流量和材质定制服务,请咨询上海斐卓喷雾系统公司销售工程师。
Siphon type spray nozzle:
,扇形雾化喷嘴喷头, itcan adjust and control the proportion of siphon, meet a variety of applications
Adjusting screw button, have a scale to ensurerepeatable siphonSize
mixture ratio can be adjusted,雾化喷嘴大全, concentration change;
·mixture of spray operation can be controlled;
, checkthe design is novel, siphon device response is fast,雾化喷嘴, reliable operation.
To savethe use of chemicals
Flowrange ‐ 6 0.5 GPM (1.9 22.7 l/min)
Maximum pressure: 4000 psi (276 bar)
Threaded nlet connection: 1/2 '' 3/8 'or MPT/BSPT
Material is given priority to with brass material, contains a fluorine rubber check seat
and o-ring (standard) Provide special material flow and customized services, please consult the Fei zhuospray system company sales engineer in Shanghai.
车间、厂房降温加湿雾化喷嘴
在气温高达40°的气温下,上班有没有一种煎熬啊,想必宝宝们都会举起双手赞成。在办公室的白领阶层都是吹着空调,在这样舒服的环境下还是能够愉快工作的,但是现在有很多我们一线的员工,他们的工作车间是没有空调的,为了能够让他们工作的舒服点,我们整体研发出一套喷雾系统,无液滴和湿壁,雾化效果极佳,是厂房加湿的不二之选。
加湿喷嘴主要以二流体雾化喷嘴为主,在压缩空气的协助下,液滴雾化效果经过高压撞击和摩擦,雾化效果更佳,在喷嘴内混合,经喷嘴孔喷射而出之后雾化效果达到极好。
雾化加湿喷嘴,喷雾形状有扇形和实心锥,喷射距离5米左右,空气压力3bar,液体压力3bar,流量2.6L/H,喷雾角度60度,安装方式以螺纹安装,螺纹尺寸3/4,另外提供卡接。
雾化加湿喷嘴的主要作用:
喷雾加湿;
厂房降温;
喷涂脱模剂;
干雾抑尘;
喷油润滑;
纸张加湿;
烟加湿;
消毒灭菌;
药剂喷洒;
Workshop, workshop temperature and humidification spray nozzle
Work under the temperature of the temperature as high as 40 °, have a kind of torment ah, must have babies will be lifted up my hands in favor of.White-collar workers in the office are blowing air conditioning, in such a comfortable environment and able to work happy, but now there are a lot of our frontline staff, their work is no air conditioning workshop, in order to be able to make their work more comfortable, we developed a whole set of spray system, there is no droplet and wet wall, good atomization effect, is a plant of humidification of choice.
Humidifying nozzle are mainly of two fluid atomization nozzle, with the help of compressed air, droplets atomization effect after high pressure impact and friction, atomization effect is better, mix in the nozzle, the nozzle hole jet out after atomization effect to achieve perfection.
Atomized humidifying nozzle, spray with fan and solid cone shape, spray distance of 5 meters, 3 bar air pressure, liquid pressure of 3 bar, flow rate of 2.6 L/H,水空气雾化喷嘴, the spray Angle of 60 degrees, installation assembly with screw thread, thread sizes 3/4, also offers clamping.
The main of the atomized humidifying nozzle:
Spray humidification;
Plant cooling;
Spraying mold release agent;
Dry fog dust suppression;
Oil lubrication;
Paper humidification;
Tobacco humidification;
Disinfection sterilization;
Agent spraying;