原装进口美国Messer MG 700万能合金焊丝mg700 TIG焊条
￥520.00
卖方承担运费
武汉市
产品详情（武汉市MG 700万能合金焊丝厂家）
品牌：
其他
型号：
MG 700万能合金焊丝
类型：
实芯
材质：
万能合金焊丝
加工定制：
否
标准直径：
1.6/2.4/3.2（mm）
熔点：
600（℃）
重量：
5000（g）
用途：
广泛
产地：
美国
长度：
1000
工作温度：
常温
焊接电流：
1(A)
牌号：
MG 700
是否含助焊剂：
否
规格：
1.6/2.4/3.2（mm）
关键词：武汉市MG 700万能合金焊丝厂家
MG 700 TIG
Premium quality high hardness
alloy for
most high speed tools steels
GENERAL CHARACTERISTICS:
Specially designed for use on high speed steels. Tungsten, molybdenum, and vanadium are alloyed with other
elements to produce a deposit that will maintain a sharp edge on high speed tool steels and withstand elevated
temperatures that are normally encountered with these tools.
APPLICATIONS:
Hardfacing and build-up of sliding surfaces, mill cutters, lathe tools, cams, punches, stencils, trimming plates,
circle cutting tools, dies, drawing mandrels, planning tools, turning tools, reamers, hot shears, mandrels and
molding plates.
TECHNICAL DATA:
Hardness
As Welded: up to 58-62 HRC
Heat Treated: up to 63-65 HRC
Hot Hardness Approx. 56 HRC at 1100oF (600oC)
Polarity DC straight (electrode -)
Shielding Gas 100% Argon
Diameters Available 1/16” (1.6mm) 3/32” (2.4mm) 1/8” (3.2mm)
PROCEDURE:
Adjust the amperage according to the base metal thickness and the amount of deposit required. All foreign
materials must be removed from weld area. Approximate preheat of tool steel is 800°-1100°F (425°-600°C). If
base metal is known follow the tool steel welding procedure. Temperature should be maintained during entire
welding operation. When making deposit on low carbon steel, no preheat is required but a minimum of three
layers is necessary to overcome dilution. After welding, reheat to 1000°F (540°C), allow to cool slowly. Final
(武汉市MG 700万能合金焊丝厂家)
原装进口美国Messer MG 700万能合金焊丝mg700 TIG焊条
Premium quality high hardness
alloy for
most high speed tools steels
GENERAL CHARACTERISTICS:
Specially designed for use on high speed steels. Tungsten, molybdenum, and vanadium are alloyed with other
elements to produce a deposit that will maintain a sharp edge on high speed tool steels and withstand elevated
temperatures that are normally encountered with these tools.
APPLICATIONS:
Hardfacing and build-up of sliding surfaces, mill cutters, lathe tools, cams, punches, stencils, trimming plates,
circle cutting tools, dies, drawing mandrels, planning tools, turning tools, reamers, hot shears, mandrels and
molding plates.
TECHNICAL DATA:
Hardness
As Welded: up to 58-62 HRC
Heat Treated: up to 63-65 HRC
Hot Hardness Approx. 56 HRC at 1100oF (600oC)
Polarity DC straight (electrode -)
Shielding Gas 100% Argon
Diameters Available 1/16” (1.6mm) 3/32” (2.4mm) 1/8” (3.2mm)
PROCEDURE:
Adjust the amperage according to the base metal thickness and the amount of deposit required. All foreign
materials must be removed from weld area. Approximate preheat of tool steel is 800°-1100°F (425°-600°C). If
base metal is known follow the tool steel welding procedure. Temperature should be maintained during entire
welding operation. When making deposit on low carbon steel, no preheat is required but a minimum of three
layers is necessary to overcome dilution. After welding, reheat to 1000°F (540°C), allow to cool slowly. Final
dimension grinding can then be done.
*注：前述说明仅当出现价格比较时有效。若商家单独对划线价格进行说明的，以商家的表述为准。 价格说明
未划线价格：未划线的价格是商品在阿里巴巴中国站上的销售标价，具体的成交价格根据商品参加活动，或因用户使用优惠券等发生变化，最终以订单结算页价格为准。
未划线价格：未划线的价格可能是商品即将参加活动的活动价，仅供参考，具体活动时的成交价可能因用户使用优惠券等发生变化，最终以活动是订单结算页价格为准。
(武汉市MG 700万能合金焊丝厂家)
原装进口美国Messer MG 700万能合金焊丝mg700 TIG焊条
更多精品
供应美国进口万能 8N12 TIG镍基合金焊丝
面议
供应美国进口万能 8N12 TIG镍基合金焊丝
面议
供应MAGNA万能焊条8N12TIG镍基合金焊丝
￥ 3,000.00
供应万能8N12T.I.G焊丝万能焊丝
￥ 18.00
供应万能焊条-焊丝
面议
供应万能焊条，万能焊丝
￥ 320.00
440万能焊丝
￥ 200.00
供应M130万能焊丝
￥ 10.00
万能M51焊条焊丝
面议