供应二手BTU八温区回流焊
出售二手进口BTU八温区回流焊，型号：Pyramax98，上八下八，带电脑、轨道、链条，成色超新、保养良好，欢迎现场看机！
BTU八温区回流焊规格参数：
| Maximum temperature rating: | 350°C |
|
| Nominal operating temperature: | 80-325°C |
|
| NumA. General SpecificatiONs ber of controlled heated zones: | 7 Top | 7 Bottom |
| Oven atmosphere: | Air |
|
| Working dimensions: |
|
|
| Conveyor belt | 18 in. | 457 mm |
| Product clearance | 2 in. | 51 mm |
B. Dimensional Layout
| Description | Inches | Centimeters |
| Onload Area | 5 | 12.7 |
| Entrance, Lip Vent ExhauST | 8 | 20.5 |
| Zone 1 | 14 | 35.6 |
| Zone 2 | 14 | 35.6 |
| Zone 3 | 14 | 35.6 |
| Zone 4 | 14 | 35.6 |
| Zone 5 | 14 | 35.6 |
| Zone 6 | 14 | 35.6 |
| Zone 7 | 14 | 35.6 |
| Total Heated Length | 98 | 248.9 |
| Exit, Lip Vent Exhaust | 8 | 20.5 |
| Fan Cooling | 22 | 55.9 |
| Offload Area | 6 | 15.2 |
| Total System Length | 147 | 373.4 |
| Total System Width | 60 | 152.4 |
| Total System Height (Assumes 36” Hearth Line) | 60 | 152.4 |
D. Conveyor System
| Conveyor Belt |
|
|
| Belt Width | 18 in. | 45.4 cm |
| Material | 302 Stainless Steel Flat Flex |
|
| ConveyorSpeed Range | 10 - 60 in/min. | 25.4 – 152.4 cm/min. |
| Conveyor Speed Nominal | 32 in/min. | 81.3 cm/min. |
| Product Clearance | 2 in. (3 in. optional) | 51 mm (76 mm optional) |
| Drive Motor | 1/16 hp / brushless DC |
|
| Conveyor Height from floor | 33 - 39 in. | 839 - 991 mm |
(深圳市二手BTU八温区回流焊厂家)
供应二手BTU八温区回流焊
供应二手BTU八温区回流焊
￥ 888.00
供应八温区回流焊
面议
供应二手科隆威八温区回流焊
￥ 888.00
供应二手日东八温区氮气回流焊
￥ 888.00
供应二手日东八温区回流焊
￥ 80,000.00
供应武汉二手和西八温区回流焊，湖北二手和西八温区回流焊
面议
供应武汉二手ETC八温区回流焊,湖北二手ETC八温区回流焊
面议
供应八温区回流焊，富士贴片机
￥ 1.00
供应八温区LED回流焊焊接机
面议