路博润ESTANE 3D TPU F98A-030 CR HC

路博润ESTANE 3D TPU F98A-030 CR HC ESTANE? 3D热塑性聚氨酯（TPU） 可以粒料形式供应，用于长丝挤出，并且目前正在开发以粉末形式供应的TPU，以满足市场对3D打印部件的严格要求，如高强度和高耐磨性、高机械性能以及出色的表面/触觉特性。 Features: High clarity and printed part quality Uses: 3D Printing using Fused Filament Fabrication (FFF) technology ? Filament dried at 70?C during 2h in a convection oven prior to printing ? Printing conditions: MakerBot Replicator, extrusion temp = 230C, base = 110C, speed = 90mm/s ? Prior to testing samples were conditioned at 23°C for 48 hours. Supply Form and Standard Packaging ? ESTANE? 3D TPU F98A-030 CR HC PL is supplied in pellet form and packaged in 25kg bags. Material Preparation ? Prior to strand extrusion, ESTANE? 3D TPU F98A-030 CR HC PL pellets must be dried at 100?C for 2-4 hours. ? It is recommended to dry the pellets in a desiccant type dryer. Target dew point should be -40°C. ? The produced filaments must be kept in a sealed bag with enough silica gel desiccant until use, in moisture free conditions during printing, and dried overnight at 70C in a standard convection oven in e of moisture exure ? Depending on the applied processing technique, the maximum moisture level should be 0.02%. Physical Properties Value (Metric) Unit Test Method Hardness (5 sec) 98 Shore A ISO 868 Specific Grity 1.09 g/cm3 ISO 2781 Tensile Strength (XY) 28 MPa ISO 527 Ultimate Elongation (XY) 380 % ISO 527 Tensile Stress at (XY): - 100 % Elongation 13 MPa ISO 527 - 300 % Elongation 23 MPa ISO 527